Power supply
•
Remove the plate.
•
Working on both bodies, undo and re-
move the screw and detach the body.
•
Working on the body in question, re-
move the injector, slide off the clip and
the injector itself.
CAUTION
NEVER UNDO THE SCREWS IN THE FIGURE
Use of diagnostics instrument for injection system
L'elenco completo di tutti i parametri, stati, errori,...ecc è disponibile nella home page del sito
www.serviceaprilia.com nella sezione ricerca: Parametri PADS.
Gli stessi parametri, stati, errori,.. ecc...suddivisi per componente a cui si riferiscono sono presenti
all'interno della sezione Impianto elettrico, capitolo: Verifiche e controlli
P SUPP - 288
SHIVER 900