APRILIA SHIVER 900 Service Station Manual page 101

SHIVER 900
TABLE A2 - REAR BRAKE SWITCH-REAR ABS
SENSOR
•
Secure the rear ABS sensor (1) and
rear brake switch (7) wiring harness to
the rear brake pipes (3) using the
clamps (6).
TABLE A3 - REAR BRAKE SWITCH-REAR ABS
SENSOR
•
Check that the rear ABS sensor con-
nector is connected securely and posi-
tioned underneath the main wiring
harness.
TABLE B - MAIN SADDLE SUPPORT WIRING
HARNESS
•
Fasten the main wiring harness (1) to
the saddle support frame using two
clamps (2).
Electrical system
ELE SYS - 101