APRILIA SHIVER 900 Service Station Manual page 395

SHIVER 900
REMOVING THE COMPLETE H2O PUMP
•
Remove the clutch cover.
•
Unscrew and remove the three H2O
pump retaining screws.
•
Remove the H2O pump and extract the
control chain.
NOTE
WHEN REMOUNTING THE PUMP, REPLACE THE "O-
RINGS"
Installing
MOUNTING THE COMPLETE H2O PUMP
•
- Insert the control chain and position
the H2O pump in its housing.
•
Insert the three H2O pump retaining
screws, applying the pre-defined tight-
ening torque.
Cooling system
COOL SYS - 395