APRILIA SHIVER 900 Service Station Manual page 97

SHIVER 900
TABLE M3 - VOLTAGE REGULATOR/TIMING
SENSOR
•
The main wiring cabinet regulator con-
nector must be connected correctly
and positioned above the timing sen-
sor regulator connector.
TABLE N - HORN
•
The horn must be fastened to its sup-
port bracket and, once its connectors
have been inserted, must not be in con-
tact with any other component.
TABLE O - SIDE STAND
•
After fastening the side support strut to
the stand support, secure the sensor
(1) wiring harness using a clamp (2).
Electrical system
ELE SYS - 97