APRILIA SHIVER 900 Service Station Manual page 108

Electrical system
TABLE A10 - ENGINE WIRING HARNESS ON
THROTTLE BODY AND FILTER BOX
•
Install the air temperature sensor (12)
and connect it to the engine wiring har-
ness.
TABLE A11 - ENGINE WIRING HARNESS ON
THROTTLE BODY AND FILTER BOX
•
After reassembling the filter box, com-
plete with air filter and intake ducts, and
before inserting it, connect the water
temperature sensor connector (13).
TABLE A12 - ENGINE WIRING HARNESS ON THROTTLE BODY AND FILTER BOX
•
Connect the coil connectors (14) and attach them to the supports positioned on the base of
the filter box.
ELE SYS - 108
SHIVER 900