Chassis
•
Check that the links in the transmission
chain are not seized and that it can
move in both directions.
•
Use a generic clincher to re-tighten the pins of the link (checking riveting at points "A").
•
Turn the pin of the specific tool 90° and re-engage the link pin again (checking riveting at
points "B").
•
Grease the chain and record the clearance.
Adjusting
The vehicle has an endless chain, without master link.
NOTE
CARRY OUT MAINTENANCE OPERATIONS AT HALF THE INTERVALS SPECIFIED IF THE VE-
HICLE IS USED IN PARTICULAR RAINY OR DUSTY CONDITIONS, OFF ROAD OR FOR TRACK
USE.
CHAS - 334
SHIVER 900