APRILIA SHIVER 900 Service Station Manual page 298

Suspensions
•
Extract the shaft (6) and remove it.
•
After removing the locking plate and
the device used to compress the
spring, remove the upper plate (7) and
the pre-loading pipe (3).
•
Remove the spring (8) allowing the oil
inside the stem to drip out.
•
Drain the oil into a container having
sufficient capacity, extending the stem
several times in order to ensure the oil
is drained completely.
DO NOT DISPOSE OF OIL INTO THE ENVIRONMENT.
DISPOSE OF ENGINE OIL IN A SEALED CONTAINER AND
TAKE IT TO YOUR SUPPLIER OR TO THE NEAREST USED
OIL COLLECTION CENTRE.
SUSP - 298
SHIVER 900