APRILIA SHIVER 900 Service Station Manual page 412

Bodywork
•
Remove the upper part (21) of the filter
box.
•
Remove the two screws (22) used to
fasten the air pressure sensors.
•
Disconnect the connectors and re-
move the sensors.
•
Remove the two clamps (23) used to
fasten the wiring harness to the throttle
body.
NOTE
DURING REASSEMBLY, REPLACE THE CLAMPS IN THE
POSITIONS IDENTIFIED BY THE GREY TAPE.
•
Disconnect the two connectors (24)
from the throttle body.
BODYW - 412
SHIVER 900