APRILIA SHIVER 900 Service Station Manual page 30

Characteristics
Pos. Description
1 Self-tapping, SWP air pressure sen-
sor fastening screws
2 Self-tapping air temperature sensor
fastening screws
3 SWP filter box lid fastening screws
4 SWP screws used to fasten the up-
per part of the filter box
5 SWP screws used to fasten the filter
box side cover
6 SWP wiring harness support bracket
fastening screws
7 SWP control unit cover fastening
screws
8 SWP control unit support fastening
screws
Pos. Description
1 Flanged, hex. head screws used for
fastening the inlet coupling
2 Button head, hex. socket screws
used for fastening the throttle body to
the bracket
3 Flanged, hex. head screws used for
fastening the Injectors
CHAR - 30
A
IR FILTER CASING
Type Quantity
5x20 2
2.9x12 2
5x20 8
5x20 10
5x20 3
5x20 3
3.9x14 2
5x14 2
T
HROTTLE BODY
Type Quantity
M6x60 8
M6 8
M6 2
SHIVER 900
Torque Notes
2 Nm (1.48 lb ft)
2 Nm (1.48 lb ft)
2 Nm (1.48 lb ft)
2 Nm (1.48 lb ft)
2 Nm (1.48 lb ft)
2 Nm (1.48 lb ft)
2 Nm (1.48 lb ft)
2 Nm (1.48 lb ft)
Torque Notes
12 Nm (8.85 lb ft) Loct. 242
12 Nm (8.85 lb ft) Loct. 242
12 Nm (8.85 lb ft) Loct. 242
-
-
-
-
-
-
-
-