APRILIA SHIVER 900 Service Station Manual page 109

SHIVER 900
TABLE A13 - ENGINE WIRING HARNESS ON
THROTTLE BODY AND FILTER BOX
•
Route the flywheel wiring harness (15)
under the tab on the control unit sup-
port box.
TABLE A14 - ENGINE WIRING HARNESS ON
THROTTLE BODY AND FILTER BOX
•
Connect control unit connectors (16)
and apply a clamp (17) on the small
connector so that the wiring harness
remains inside the support box.
Electrical system
ELE SYS - 109