APRILIA SHIVER 900 Service Station Manual page 24

Characteristics
Pos. Description
1 Flanged, hex. head screws for fas-
tening the voltage regulator to the
frame
2 Flanged SWP screws for fastening
the control unit to the base of the filter
box
3 Screws used for fastening the coils to
the heads
4 Nut used for fastening the power
supply cable to the starter motor
5 Horn fixing screw
Central part
Pos. Description
1 Cyl. head, hex. socket screws used
for fastening the side fairings to the
engine
2 TORX cyl. head screws used for fas-
tening the trellis to the frame side
fairings
3 Cyl. head, hex. socket screw used for
fastening the shock absorber coun-
ter-plate to the right hand frame side
fairing
4 Cyl. head, hex. socket screws used
for fastening the saddle support to
the frame
5 Flanged, hex. head screws used for
fastening the silencer support brack-
et to the saddle support
CHAR - 24
F
RONT ELECTRICAL SYSTEM
Type Quantity
M6x20 2
M5x20 4
M6 2
M6 1
M6x25 1
C
HASSIS
Type Quantity
M12x282 3
M12x53 4
M10x30 1
M8x35 4
M8x20 2
SHIVER 900
Torque
10 Nm (7.38 lb ft)
2.5 Nm (1.84 lb ft)
5 Nm (3.69 lb ft)
10 Nm (7.38 lb ft)
10 Nm (7.38 lb ft)
Torque
80 Nm (59.00 lb ft)
80 Nm (59.00 lb ft)
50 Nm (36.88 lb ft) Pre-impregnated
35 Nm (25.81 lb ft) Pre-impregnated
25 Nm (18.44 lb ft)
Notes
-
-
-
-
-
Notes
-
-
screw
screws
-