APRILIA SHIVER 900 Service Station Manual page 211

SHIVER 900
•
If the external diameter of the counter-
sink is equal to or less than 15.50 mm,
rework the threading with a male M10
x 1.25. Use a manual male finisher or
a low input machine series male.
•
Blow with compressed air.
•
Wash with degreasing spray.
•
Blow with compressed air.
•
Replace the pinion's fastening ele-
ments with upgraded fastening ele-
ments, as indicated in the Spare Parts
Catalogue.
•
If the external diameter of the counter-
sink is greater than 15.50 mm, replace
the secondary shaft and the pinion's
fastening elements with upgraded
components, as indicated in the Spare
Parts Catalogue.
Gear selector
Engine
ENG - 211