Engine
Installing the crankshaft
•
Place the left side crankcase half on
the engine support adequately.
•
Place the crankshaft on the seat of the
crankcase half with caution.
Refitting the crankcase halves
•
In order to reposition the guards, repeat the procedure described in the section "OPENING
THE GUARDS" in reverse order.
CAUTION
TAKE CARE NOT TO MAKE EXCESSIVE USE OF THREEBOND AS THIS COULD PREVENT THE
OIL FROM PASSING BETWEEN THE GUARDS.
CAUTION
ENSURE THAT THE AL GUARDS ARE POSITIONED AS PERPENDICULARLY AS POSSIBLE, IN
ORDER TO AVOID DAMAGING THE MAIN HALF BEARINGS.
See also
Splitting the
crankcase halves
Lubrication
ENG - 274
SHIVER 900