APRILIA SHIVER 900 Service Station Manual page 305

SHIVER 900
•
Using a suitable tool, complete with
striking hammer, insert oil seal into its
housing (3).
Specific tooling
AP8140189 Tool for fitting oil seal for 43 mm
(1.69 in) diameter hole
AP8140146 Weight
•
Position the seeger ring (2) inside the
sleeve.
•
Insert the dust guard (1) into its hous-
ing correctly.
•
Place the fork stem vertically on a work
surface.
•
Fill the stem with the quantity of oil in-
dicated in the "Refilling oil" section.
Suspensions
SUSP - 305