Bodywork
Pos.
Description
2
Self-tapping screws used for fasten-
ing the tail fairings to the battery com-
partment
3
Self-tapping, cyl. head Pozidriv
screws used for fastening the grab-
bar to the tail fairings
4
Button head, hex. socket screws
used for fastening the number plate
holder to the number plate holder
support
5
Flanged, hex. head screws used for
fastening the grab-bar support to the
grab bar and the saddle support
•
Remove the rear grab bar and the two
upper screws used for fastening the tail
fairing
•
Extract the pin (1) from the side fairing,
and raise the fairing so as to unhook it
at point (2).
•
Remove the two ignition switch assem-
bly fastening screws, remembering to
retrieve the metallic cable clamp
See also
Rear grab rail
BODYW - 434
Type
Quantity
M5x19
4
4.2x16
2
M5x9
3
M8x30
4
22 Nm (16.23 lb ft)
SHIVER 900
Torque
Notes
4 Nm (2.95 lb ft)
3 Nm (2.21 lb ft)
4 Nm (2.95 lb ft)
-
-
-
-