APRILIA SHIVER 900 Service Station Manual page 223

SHIVER 900
Pos. Description
3 Pump cover / Clutch cover / clutch
side half-crankcase fastening screw
4 Water pump control crown fastening
nut
5 Water pump impeller (brass insert)
6 Flanged hex head screw for fasten-
ing the chain tensioner slider
7 Pump support fastening screw
•
Remove the water pump cover.
•
Undo and remove the eleven screws
working in a diagonal sequence.
•
Collect the gasket.
Removing the clutch cover
Pos. Description
1 Clutch cover / Clutch side cover fas-
tening screw
2 Clutch fastening nut
3 Oil filler cap on clutch cover
4 Clutch Control Plate / Support coun-
tersunk hex head fastening screw
Type Quantity
M6x60 2
M6 1
M6 1
M6x12 1
M6x30 3
C
LUTCH COVER
Type Quantity
M6 6
M24x1.5 1 177 Nm (130.55 lb ft)
M25x1.25 1
M5x12 3
Torque Notes
13 Nm (9.59 lb ft)
12 Nm (8.85 lb ft) Loct. 244
4 Nm (2.95 lb ft)
9 Nm (6.64 lb ft) Loct. 242
12 Nm (8.85 lb ft)
Torque Notes
13 Nm (9.59 lb ft)
Chamfer
2 Nm (1.48 lb ft)
5 Nm (3.69 lb ft) 3M SCOTCH GRIP
Engine
-
-
-
-
-
2353
ENG - 223