APRILIA SHIVER 900 Service Station Manual page 197

SHIVER 900
Pos. Description
1 Flanged, hex. head screw used for
fastening the pinion
2 Cyl. head, hex. socket screw used for
fastening the gear lever to the gear-
box output shaft
3 TORX screw used for fastening the
gear lever pedal
4 Flanged, hex. head screws used for
fastening the pinion cover guard
Vehicle preparation
•
Disconnect the battery and remove the
fuel tank, the coolant radiator and the
exhaust system.
•
Remove the filter box and disconnect
the water temperature sensor connec-
tor (1).
E - A - L
NGINE CCESSORIES
Type
M10x1.25x26
M6x20
M6x22
M6x12
EVER MECHANISMS
Quantity Torque
1 50 Nm (36.88 lb ft)
1 10 Nm (7.38 lb ft)
1 8 Nm (5.90 lb ft)
2 10 Nm (7.38 lb ft)
Engine from vehicle
Notes
Pre-impregnated
screw
-
Loct. 270
-
ENG VE - 197