APRILIA SHIVER 900 Service Station Manual page 103

SHIVER 900
TABLE D1 - SADDLE SUPPORT ZONE
•
After connecting the license plate light
connector (3) and positioning it above
the rear light assembly connector (2),
fasten the wiring harnesses to the rear
grab bar using a clamp (4).
TABLE D2 - SADDLE SUPPORT ZONE
•
Position the fall sensor (5) and after
connecting the connector, close all the
connectors that were positioned earli-
er.
TABLE D3 - SADDLE SUPPORT ZONE
•
Insert the AMP (Aprilia Multimedia
Platform) connector (6) in the dedica-
ted space and the main fuse (7), con-
necting it to the support saddle sup-
port.
Electrical system
ELE SYS - 103