APRILIA SHIVER 900 Service Station Manual page 315

SHIVER 900
•
Tighten the sleeving blocking screws,
applying the pre-defined torque.
•
Loosen the nut used for fastening the
upper steering plate again.
•
Tighten the upper steering plate cen-
tral closure screw, applying the pre-
defined torque.
•
Tighten the upper steering plate nut
again, applying the predefined torque.
•
After refitting the handlebars, apply a
dynamometer to the ends of the grips
and check the rotation resistance.
Characteristic
Rotation resistance
500 +100/-300 g (1.10 +0.22/-0.66 lb)
Rear
Suspensions
SUSP - 315