APRILIA SHIVER 900 Service Station Manual page 95

SHIVER 900
TABLE I1 - OIL TEMPERATURE SENSOR
•
Connect the intermediate wiring har-
ness connector (2) to the correspond-
ing connector on the main wiring
harness (3), which must be attached to
the dedicated support mounted on the
base of the filter box.
TABLE L - FAN
•
Connect the fan connector to the water
radiator using a large clamp.
TABLE M - VOLTAGE REGULATOR/TIMING
SENSOR
•
After fastening the voltage regulator (1)
to the frame, secure the "timing sensor
regulator" wiring harness (2) and the
"main wiring harness regulator" wiring
harness (3) using a clamp (4).
Electrical system
ELE SYS - 95