APRILIA SHIVER 900 Service Station Manual page 422

Bodywork
Pos. Description
1 Self-tapping, cyl. head slot drive
screws used for fastening the grilles
to the duct covers
2 Self-tapping, cyl. head slot drive
screws used for fastening the duct
covers to the ducts
3 Button head, hex. socket screws
used to fasten the duct covers to the
radiator
4 Button head, hex. socket screws for
fastening the conveyors to the tank
5 Button head, hex. socket screws for
fastening the conveyors to the brack-
et
6 Self-tapping screws used for fasten-
ing the tank/fuel tank cover/ducts
7 Self-tapping, cyl. head, slot drive
screws used for fastening the side/
tail fairings
•
Remove the saddle.
•
Remove from both sides the fixing
screws of the ignition switch assembly
dashboard.
•
Lift the front of the ignition switch as-
sembly dashboard and remove the
rear from the tank cover.
•
Operating from both sides of the mo-
torcycle, remove the fixing screws of
the duct covers.
BODYW - 422
S
IDE FAIRINGS
Type Quantity
4.2x16 2
4.2x16 4
M6x16 2
M5x10 2
M5x12 2
2.9x20 2
2.9x20 4
SHIVER 900
Torque Notes
3 Nm (2.21 lb ft)
3 Nm (2.21 lb ft)
7 Nm (5.16 lb ft)
4 Nm (2.95 lb ft)
4 Nm (2.95 lb ft)
2 Nm (1.48 lb ft)
2 Nm (1.48 lb ft)
-
-
-
-
-
-
-