APRILIA SHIVER 900 Service Station Manual page 203

SHIVER 900
•
Remove the two screws (29) used to
fasten the plate positioned under the
steering headstock.
•
Move the complete ABS system (30)
towards the outside so that it is easier
to remove the engine.
Removing the engine from the vehicle
•
Carry out the operations described in
the vehicle preparation procedure.
•
Access the left hand side of the motor-
cycle, unscrew the upper central nut
(1) and remove it.
•
Access the left hand side of the motor-
cycle, unscrew the lower nut (2) and
remove it.
Engine from vehicle
ENG VE - 203