APRILIA SHIVER 900 Service Station Manual page 84

Electrical system
TABLE B - INSTRUMENT PANEL
•
The clutch switch wiring harness (1),
which may be identified by the grey
tape, and the front stop switch wiring
harness (2) must be routed over the
column switch wiring harness and the
brake/clutch pipes.
TABLE B1 - INSTRUMENT PANEL
•
The front indicator cables (3) must be
routed as shown in the photo in order
to avoid pinching when the front head
light is fastened to the steering plate.
ELE SYS - 84
SHIVER 900