SHIVER 900
•
Position the clutch hub nut and tighten
it using the appropriate tool.
Specific tooling
9100896 Clutch bell stopper
•
After having tightened the nut, proceed
with the chamfering.
•
Insert the flat ring (1).
•
Insert the disc ring (2).
CAUTION
MAKE SURE THE DISC RING IS INSERTED FACING THE RIGHT DIRECTION; THE RING'S CONE
MUST BE FACING THE ENGINE.
•
Insert the turned drive disc (3).
•
Insert the nitride steel disc (4).
•
Insert the clutch discs starting with the
discs with friction material, and alter-
nating them with steel discs.
•
Position the control rod.
Engine
ENG - 233