APRILIA SHIVER 900 Service Station Manual page 220

Engine
•
Apply the flywheel to the crankshaft.
•
Apply the screw and the washer with-
out tightening.
•
Position the appropriate tool to lock the
flywheel in place.
•
Holding the flywheel still using the ap-
propriate tool, tighten the screw on the
crankshaft.
•
Remove the special tool.
Specific tooling
020713Y Flywheel extractor
•
Position the retention plate.
•
Tighten the screw.
ENG - 220
SHIVER 900