APRILIA SHIVER 900 Service Station Manual page 436

Bodywork
•
Remove the upper fastening screw (2)
and retrieve the "T" bushing with the
rubber grommet.
•
If the number plate support has not
been removed, remove the screw (3)
and the respective washer and grom-
met.
•
Slide the cover (4) off from the rear.
See also
Seat
License plate holder
Rear grab rail
Taillight assy.
•
Unscrew and remove the protective
rubber grommets (5)
BODYW - 436
SHIVER 900