APRILIA SHIVER 900 Service Station Manual page 126

Electrical system
To check the ABS fuse (I)
•
Remove the protective cover, take out
the fuse (I) and check whether the fila-
ment (2) is broken. In this case change
it with one of the same amperage.
Specification
H) 30A fuse
I) 20A fuse
L) 5A fuse
M) spare fuse
The main fuses are located in the central part of the motorcycle, under the rider saddle.
Control unit
•
To remove the control unit, refer to chapter " Bodywork", "Air filter housing" section.
CONTROL UNIT - Diagnosis
Function
It manages the Ride by wire system, the injection/
ignition, the system safety checks and the self-di-
agnosis function
Level in electrical circuit diagram:
Each level in which the main component involves
the control unit
Position:
•
on the vehicle: to the left of the filter
housing
•
connector: on the control unit connec-
tor from 52 PIN ENGINE, connector
from 28 PIN VEHICLE
Pin out:See CONNECTORS paragraph
DIAGNOSTIC TOOL:INFO
(screen page/example values with key ON)
•
ISO code / -
•
Drawing number / - (identified inserted by the manufacturer)
ELE SYS - 126
MAIN FUSES DISTRIBUTION
Recharge, "F-D-C positive fuses", key positive, main relay, 5A
SHIVER 900
Desc./Quantity
positive fuse (dashboard)
ECU ABS permanent positive
dashboard permanent positive
-