APRILIA SHIVER 900 Service Station Manual page 405

SHIVER 900
•
Access the vehicle from underneath
the exhaust terminal and unscrew the
lower rear light assembly fastening
screw (3) and retrieve the "T" bushing
(4).
•
Remove the rear light assembly (5).
License plate holder
•
Remove the saddle and the rear light
assembly.
•
Unscrew the three upper screws (1)
and remove them.
•
Remove the two screws (3) that fasten
the number plate support to the ex-
haust terminal, taking care to retrieve
the washers.
Bodywork
BODYW - 405