APRILIA SHIVER 900 Service Station Manual page 407

SHIVER 900
Pos. Description
1 Self-tapping, SWP air pressure sen-
sor fastening screws
2 Self-tapping air temperature sensor
fastening screws
3 SWP filter box lid fastening screws
4 SWP screws used to fasten the up-
per part of the filter box
5 SWP screws used to fasten the filter
box side cover
6 SWP wiring harness support bracket
fastening screws
7 SWP control unit cover fastening
screws
8 SWP control unit support fastening
screws
•
Remove the saddle, the fuel tank com-
plete with lateral ducts and the radiator
•
Disconnect the air temperature sensor
connector (1)
•
Disconnect the blow-by breather tube
(2) and remove it.
•
Remove the eight filter box lid fasten-
ing screws (3)
A
IR FILTER CASING
Type Quantity
5x20 2
2.9x12 2
5x20 8
5x20 10
5x20 3
5x20 3
3.9x14 2
5x14 2
Torque Notes
2 Nm (1.48 lb ft)
2 Nm (1.48 lb ft)
2 Nm (1.48 lb ft)
2 Nm (1.48 lb ft)
2 Nm (1.48 lb ft)
2 Nm (1.48 lb ft)
2 Nm (1.48 lb ft)
2 Nm (1.48 lb ft)
BODYW - 407
Bodywork
-
-
-
-
-
-
-
-