APRILIA SHIVER 900 Service Station Manual page 262

Engine
BEFORE REMOVING THE BIG END COVERS, CAREFULLY CLEAN THE SURFACES OF THE BIG
END AND THE COVER.
CAUTION
REPLACE THE FOUR RUBBER INSERTS AND THE GASKET EACH TIME THE BIG END COVER
IS REMOVED.
CAUTION
BEFORE REMOVING THE BIG END COVERS, CAREFULLY CLEAN THE SURFACES OF THE BIG
END AND THE COVER.
•
Apply THREEBOND around the perim-
eter of the big end cover along the
gasket housings.
•
Apply THREEBOND to the head at the
points indicated in figure.
•
In order to complete the remaining operations, repeat the removal procedure in reverse
order.
ENG - 262
SHIVER 900