APRILIA SHIVER 900 Service Station Manual page 215

SHIVER 900
Removing the starter motor
•
In order to remove the starter motor
complete with the support bracket, it is
necessary to remove the two screws
(1).
•
If the bracket needs to be removed
from the starter motor, first remove the
two screws (2) and then the other
screws (1).
Generator side
Pos. Description
1 Spark plug
2 Free wheel ring fastening screw
3 Rotor fastening screw - Crankshaft
4 Stator fastening screw / Flywheel
cover
5 Pick-up fastening screw / Flywheel
cover
6 Flywheel cover fastening screw
7 Crankshaft access plug
8 Crown containment plate fastening
screw
I
GNITION
Type Quantity
- 2
M6x18 6
M14x1.5 1 191 Nm (140.87 lb ft)
M6x30 3
M5x14 2
M6x30 10
- 1
M6x12 1
Torque
13 Nm (9.59 lb ft)
14 Nm (10.33 lb ft) 3M SCOTCH GRIP
Thoroughly de-
grease both of the
coupling surfaces
9 Nm (6.64 lb ft)
3 Nm (2.21 lb ft) Loct. 270
13 Nm (9.59 lb ft)
4 Nm (2.95 lb ft)
8 Nm (5.90 lb ft)
Engine
Notes
-
2353
-
-
-
-
ENG - 215