2.3 PART NAMES AND FUNCTIONS
2.3.1
Front of the SC-PRO
1
2
N°
Part
1
Bumper
2
Media guide
3
Cutting groove
4
Cutting head
5
Cutting mat
6
Pressure rollers
7
Small grid rollers
8
Large grid roller
9
Control panel
10
Tool storage holes
11
Pressure roller lever
12
Media collection bag
13
Caster wheels
3
Function
To avoid the head crashing against the side and to measure the width of
the machine during initialization.
To guide the media when moving front and backwards.
A groove to guide a knife to sheet of the media manually.
Assembly of cutting knife, sheet-off knife and EPOS sensor.
Provides a reliable cutting surface and minimizes damage to the knife tip.
To hold the media against the grid rollers.
Rollers with a lot of grip to move the media along front and backwards
There is 1 large one and 13 small ones.
Removable panel with LCD display and control keys.
Holes in the right cover to store 3 tools.
To lower or raise the pressure rollers. Note that all sent data will be
removed out of the buffers when raising the lever.
Bag to collect the media when sheeted-off.
To move the cutter easily or to fix the stand using the brakes.
User's Guide SC-PRO Cutting Plotter
4
5 6
7
17
CHAPTER 2 : PRODUCT OVERVIEW
8
9 10
AP-75280 – Rev. 1.1
11
12
13