Installation
2.2 Stand & Flexible Media Support System (VC-1300/1800)
Step 1
Please examine supplied items in the accessory box of stand carton:
2 pieces of base beams
2 pieces of side beams
1 piece of stand beam
20 pieces of M6 screws
1 piece of M5 L-shape hexagon screw driver
1 piece of Installation Guide for Stand Set
Step 2
Remove the plotter body and the accessories from the shipped carton.
Assemble the base beam to the side beam with 2 screws to form a T-shape stand.
Please pay attention to the direction of the base beam (the wheel on the front end of the beam comes
with a break while the rear one is on its own).
Front
Figure 2-2
16
ValueCut USER MANUAL
Figure 2-1
Rear
Figure 2-3
V5a 2015 Jan