Diagnostic Test For Media Sensors - MUTOH ValueCut VC-600 Maintenance Manual

Diagnostic Test for Media Sensors

This test is to diagnose the media sensors. If they are faulty, the cutting plotter cannot detect the
media length correctly. You can see the current front and rear sensor condition, you can turn it on or
off to see if sensors are out of order or not.
[ON/OFF LINE] Key
VCE-MM-02
Check Media Sensor ?
Select:{} Ok:ENTER
[ENTER] Key
Now Front is OPEN
Rear is OPEN
or
Now Front is CLOSE
Rear is CLOSE ON/OFF
Paper sensor
46
MAINTENANCE MANUAL
ON/OFF