Table 2-18 Selectable Display Message - Character Entry Chart - NEC Electra Elite IPK II Features And Specifications Manual

Electra Elite IPK II
15-07-01 Programmable Function Keys
Using the Text Message Setup key (18 + message number), a user can easily set the Selectable
Display Messaging feature with the preprogrammed message number.
20-01-02 System Options - Text Message Mode
Select whether and intercom caller should hear busy (1) or ring through (0) for extensions which
have Selectable Display Messaging set.
Any extensions previously set with Selectable Display Messaging must cancel the feature and reactivate in

order for a change in this option to take affect.
20-02-07 System Options for Multiline Telephones - Time and Date Display Mode
Set the System Time and Date display mode. The time that displays in Selectable Display
Messages follows this setting.
20-06-01 Class of Service for Extensions
Assign a Class Of Service (1~15) to an extension.
20-13-19 Class of Service Options (Supplementary Service) - Selectable Display Messaging
In an extension's Class of Service, enable (1) or disable (0) an extension's ability to use
Selectable Display Messaging.
20-16-01 Selectable Display Messages
Program the Selectable Display Messages (1~20). Refer to the chart below for character entry.
Selectable Display Messaging

Table 2-18 Selectable Display Message - Character Entry Chart

Use this keypad digit . . .
1
2
3
4
5
6
7
8
9
0
,
When you want to. . .
Enter characters:
1 @ [ ¥ ] ^
Enter characters A-C, a-c, 2.
Enter characters D-F, a-f, 3.
Enter characters G-I, g-i, 4.
Enter characters J-L, j-l, 5.
Enter characters M-O, m-o, 6.
Enter characters P-S, p-s, 7.
Enter characters T-V, t-v, 8.
Enter characters W-Z, w-z, 9.
Enter characters:
0 ! " # $
Enter characters:
+ , - . /
,
Document Revision 1
_ ' { | } >
% & <space> (
: ; < = > ?
<
)
2 - 737