NEC Electra Elite IPK II Features And Specifications Manual page 284

Document Revision 1
Programming
11-12-07 Service Code Setup (for Service Access) - Step Call
If required, customize the Step Call service code to be used by an extension user (default: 708).
11-16-01 Single Digit Service Code Setup
If required, use this option to change the Department Step Calling Single Digit Service Code
(default: 2).
15-07-01 Programmable Function Keys
Assign a function key Department Step Calling (code 36).
20-06-01 Class of Service for Extensions
Assign a Class Of Service (1~15) to an extension.
20-08-12 Class of Service Options (Outgoing Call Service) - Department Step Calling
In an extension Class of Service, enable (1) or disable (0) an extension's ability to use
Department Step Calling.
Related Features
Department Calling
Programmable Function Keys
Operation
To make a Step Call:
1. Place a call to a busy Department Group member.
- OR -
Place a call to a Department Group pilot number.
2. Dial Department Step Code (2) to call the next available Department Group member.
3. Repeat step 2 to call other Department Group members.
You step through Department Groups set in Program 16-02-01.

2 - 262
Electra Elite IPK II
Department Step Calling