NEC Electra Elite IPK II Features And Specifications Manual page 803

Electra Elite IPK II
Programming
Connect an ethernet
cable from the CPU to
the PC to be used for
SMDR.
In 10-20-01, define the
TCP port when
communicating to the
SMDR (external device
5).
In 35-01-01 set the
SMDR output to '3' for
LAN.
Station Message Detail Recording
S M D R w i t h a C P U C o n n e c t i o n ( S e r i a l / U S B / E t h e r n e t )
Which connection type
Ethernet
will be used to connect
the CPU for SMDR?
Connect a null modem cable from the CPU to
the PC to be used for SMDR.
(Refer to the Data and SMDR section in the
Electra Elite IPK II Hardware Manual for pin-out
In 10-21-02, set the baud rate
(0=4800, 1-9600, 2=19200,
In 35-01-01 set the SMDR
output to '1' for COM port.
Start
Serial
details.)
3=38400).
Go to
'A'.
Document Revision 1
Connect a USB cable
USB
to the CPU and PC.
The PC recognizes
the new hardware
and asks to install
the driver. Install
the CPU USB
driver.
In 35-01-01 set the
SMDR output to '2' for
CPUII USB.
2 - 781