NEC Electra Elite IPK II Features And Specifications Manual page 643

Electra Elite IPK II
15-07-01 Programmable Function Keys
Assign Night Service function keys (09) to extensions and set the key for the proper mode (Day,
Night, Rest, etc.). If the additional data is set to "0", the toggle mode is assigned.
20-06-01 Class of Service for Extensions
Assign a Class Of Service (1~15) to an extension.
20-07-01 Class of Service Options (Administrator Level) - Manual Night Mode Switching
In an extension's Class of Service, enable (1) or disable (0) an extension's ability to manually
switch the Night Mode (Service Code 718). This option must be enabled for an extension to be
able to display the "Night" indication.
20-10-07 Class of Service Options (Answer Service) - Automatic Answer of Universal Calls
In an extension's Class of Service, Allow (1) or Deny (0) Universal Auto Answer.
22-02-01 Incoming Call Trunk Setup
Assign the incoming trunk type for each trunk. There is one item for each Night Service Mode
(1~8).
22-04-01 Incoming Extension Ring Group Assignment
To have trunks ring extensions during the different Night Service modes (for ANA), assign
extensions to Ring Groups. For each extension in the Ring Groups (1~100), indicate in Program
22-06-01 if trunk should ring (1) or not ring (0).
22-05-01 Incoming Trunk Ring Group Assignment
To have trunks ring extensions for ANA, assign trunks to Ring Groups (1~100), You make a
different entry for each Night Service mode.
Ring Groups:
1~100
101 = Not used
102 = In-Skin/External Voice Mail
103 = Centralized Voice Mail
22-08-01 DIL/IRG No Answer Destination
If a Universal Answer call rings longer than the DIL No Answer Time (Program 22-01-04), it
routes to the Ring Group specified in this option.
Ring Groups:
1~100
101 = Not used
102 = In-Skin/External Voice Mail
103 = Centralized Voice Mail
31-05-01 Universal Night Answer/Ring Over Page
For each Night Service Mode, assign which trunks should ring which External Paging Zones.
Night Service
Document Revision 1
2 - 621