Traffic Reports - NEC Electra Elite IPK II Features And Specifications Manual

Electra Elite IPK II
Description
The system provides the ability to send data to a PC connected to the Electra Elite IPK II. The telephone
call traffic data for each extension is captured for use with the SMDR feature.
Call Traffic
The total of outgoing call frequency, outgoing call duration, incoming call frequency, answer frequency,
incoming call duration, ringing duration for each line and extension, and abandon call frequency for each
line is logged. The total of incoming calls, answer frequency, call duration for each line and extension,
and abandon call frequency of each line is logged and the data is outputted to the PC. The system totals
the hour, day, week, and month for each terminal and trunk number. This information is used by the
SMDR feature. The extension which is totalled is determined by system programming. The system
outputs this data to the PC for the total period.
Conditions
r The SMDR call buffer stores 500 calls. The buffer stores calls when the SMDR device is
unavailable. When the buffer fills, the oldest record is deleted to allow the new record to be
saved.
r If connected to the output device, the reports will print hourly. If not connected and the data
is not outputted at the end of the hour, the traffic data will be overwritten by new incoming
data.
The traffic data is lost if a power failure occurs.
r
Traffic Reports require connection to the serial connector on the CPUII( )-U( ) ETU.
r
Additional programming and a customer-provided printer are also required. Refer to the
System Hardware Manual for more on setting up and connecting to the Electra Elite IPK II
system.
r SMDR provides additional information about the system's trunk calling patterns. Refer to
Station Message Detail Recording on page 2-771
Default Setting
Disabled

Traffic Reports

Document Revision 1
Traffic Reports
for more information.
2 - 837