NEC Electra Elite IPK II Features And Specifications Manual page 387

Hide thumbs Also See for Electra Elite IPK II:
Table of Contents

Advertisement

Electra Elite IPK II
Setting handset ringer On/Off Volume in Standby Mode:
1.
Press Vol key to adjust volume normal or high.
2.
While Vol is pressed, the ringer starts to ring based on the current setting.
Ringer Volume can be adjusted with Ringer On/Off key in Off.

To Adjust Receiver Volume with a call in progress:
Press the Vol key repeatedly to adjust from Medium

When call is disconnected, default volume returns to Normal.
To Mute Handset to disable the microphone:
1.
Press Mute key.
2.
The Talk/Batt.low Led Blinks 500 msec On, 500msec Off during Mute.
3.
Press Mute again to reactivate the microphone.
Voice is not transmitted during Mute.

To make a call with Auto Talk Off:
1.
Lift the Handset from the Base Unit.
2.
Press Talk key.
3.
The Talk/Batt.low LED flashes then lights continuously to indicate an established communication
path between the Handset and the Base Unit and dial tone is generated.
4.
Dial the number.
5.
Talk to the party.
6.
When finished, press the Talk key or place Handset back in the Base Unit to disconnect the call.
To make a call with Auto Talk On:
1.
Lift the Handset from the Base Unit.
2.
The Talk/Batt.low LED flashes then lights continuously to indicate established communication path
between the Handset and the Base Unit and dial tone is generated.
3.
Dial the number.
4.
Talk to the party.
5.
When finished, press the Talk key or place Handset back in the Base Unit to disconnect the call.
term
D
Handset Cordless
High
Low
Normal in this order.
©
©
©
Document Revision 1
2 - 365

Advertisement

Table of Contents
loading

Table of Contents