NEC Electra Elite IPK II Features And Specifications Manual page 741

Electra Elite IPK II
11-14-17 Service Code Setup (for Hotel) - Hotel Room Monitor
Customize the service code (675 by default) to be used for Room Monitor.
15-07-01 Programmable Function Keys
Assign a function key as a Room Monitor key (code 39) for both the extension being monitored
and the extension initiating Room Monitor.
20-06-01 Class of Service for Extensions
Assign a Class Of Service (1~15) to an extension.
20-13-11 Class of Service Options (Supplementary Service) - Room Monitor, Initiating Extension
In an extension's Class of Service, enable (1) or disable (0) an extension's ability to initiate
Room Monitor.
20-13-12 Class of Service Options (Supplementary Service) - Room Monitor, Extension Being
Monitored
In an extension's Class of Service, enable (1) or disable (0) an extension's ability to be
monitored.
42-03-12 Class of Service Options (Hotel) - SLT Room Monitor
Enable (1) or disable (0) a single line telephone's ability to use Room Monitor.
Operation
 You must activate Room Monitor at the extension initiating the monitor and at the extension you want to
monitor. You can only listen to one extension at a time.
Multiline Terminals:
To activate Room Monitor from an idle Multiline Terminal (initiating extension):
1. Press the Room Monitor key (PGM 15-07 or SC 751: 39).
2. Dial the number of extension you want to monitor.
You can place and answer other calls while Room Monitor is active.

To activate Room Monitor from an idle Multiline Terminal (extension to be monitored):
1. Press Room Monitor key (PGM 15-07 or SC 751: 39).
2. Dial the number of the extension you are at.
For example, if you are at extension 106, dial 106.

 You can place and answer other calls while Room Monitor is active.
To cancel Room Monitor (at either extension):
1. Press the Room Monitor key at both the initiating extension and the monitored extension.
Room Monitor
Document Revision 1
2 - 719