NEC Electra Elite IPK II Features And Specifications Manual page 36

Document Revision 1
Operation
To enter an Account Code any time while on a trunk call:
The outside caller cannot hear the Account Code digits you enter. You can use this procedure if your
system has Optional Account Codes enabled. You may also be able to use this procedure for incoming
calls. This procedure is not available for single line telephones.
1. Dial .
,
- OR -
Press your Account Code key (PGM 15-07 or SC 751: code 50).
2. Dial your Account Code (1~16 digits, using 0~9 and
If Account Codes are hidden, each digit you dial will show an "

3. Dial .
,
- OR -
Press your Account Code key (PGM 15-07 or SC 751: code 50).
To enter an Account Code before dialing the outside number:
If your system has Forced Account Codes, you must use this procedure. If it has Verified Account
Codes, you can use this procedure instead of letting the system prompt you for your Account Code. You
may also use this procedure if your system has Optional Account Codes.
If your system has Verified Account Codes enabled, be sure to choose a code programmed into your
Verified Account Code list.
1. Access trunk for outside call.
You can access a trunk by pressing a line key or dialing a code (except 9). Refer to

on page 2-171
2. Dial .
,
- OR -
Press your Account Code key (PGM 15-07 or SC 751: code 50)
3. Dial your Account Code (1~16 digits, using 0~9 and
If you make an incorrect entry, your system may automatically alert the operator. If Account Codes are hidden,

each digit you dial will show an "
4. Dial .
,
- OR -
Press your Account Code key (PGM 15-07 or SC 751: code 50).
2 - 14
for more information.
" character on the telephone's display.
,
).
#
" character on the telephone's display.
,
).
#
Electra Elite IPK II
Central Office Calls, Placing
Account Code Entry