NEC Electra Elite IPK II Features And Specifications Manual page 37

Electra Elite IPK II
5. Dial the number you want to call.
If you hear "stutter dial tone after dialing the number, ARS is requesting that you enter an Automatic Route

Selection Authorization Code. Refer to
To enter an Account Code for an incoming call:
This procedure is not available for single line telephones.
1. Answer incoming call.
If Account Codes for Incoming Calls is disabled, the following steps will dial digits out onto the connected trunk.

2. Dial .
,
3. Enter the Account Code.
 You can enter any code of the proper length. Incoming Account Codes cannot be Forced or Verified.
4. Dial .
,
To enter an Account Code while placing a trunk call:
If your system has Forced Account Codes, you must follow this procedure.
1. Access trunk for outside call.
You can access a trunk by pressing a line key or dialing a code. Refer to

2-171 for more information.
2. Dial .
,
3. Dial your Account Code (1~16 digits, using 0~9 and
4. Dial .
,
5. Dial number you want to call.
If you hear "stutter" dial tone after dialing the number, ARS is requesting you to enter an ARS Authorization

Code. Refer to the
Codes.
Account Code Entry
Automatic Route Selection on page 2-65
Automatic Route Selection on page 2-65
for more information.
Central Office Calls, Placing on page
).
#
feature for more information on ARS Authorization
Document Revision 1
2 - 15