NEC Electra Elite IPK II Features And Specifications Manual page 197

Electra Elite IPK II
15-03-03 Single Line Telephone Basic Data Setup - Terminal Type
Enter 1 for this option to allow a single line port to receive DTMF tones after the initial call setup.
Enter 0 to have the port ignore DTMF tones after the initial call setup. For Voice Mail, always
enter 1 (e.g., receive DTMF tones).
15-06-01 Trunk Access Map for Extensions
Assign Trunk Access Maps to extensions.
Trunk Access Maps: 1~200
15-07-01 Programming Function Keys
To simplify placing calls, assign function keys for placing trunk calls: Line keys (code
trunk), Trunk Group keys (code
Trunks: 1~200
20-02-06 System Options for Multiline Telephones - Preselection Time
Set the preselection interval (0~64800 seconds). When a multiline terminal user preselects a
line key, the system remembers the preselection for this interval.
20-02-09 System Options for Multiline Telephones - Disconnect Supervision
Use this option to enable (1) or disable (0) disconnect supervision for the system trunks.
20-06-01 Class of Service for Extensions
Assign a Class Of Service (1~15) to extensions.
20-07-12 Class of Service Options (Administrator Level) - Trunk Port Disable
For each Class of Service (1~15), enable (1) or disable (0) an extension's ability to use the Trunk
Port Disable feature.
20-08-02 Class of Service Options (Outgoing Call Service) - Trunk Calls
In an extension's Class of Service, enable (1) or disable (0) trunk calling.
20-13-13 Class of Service Options (Supplementary Service) - Continued Dialing
In an extension's Class of Service, enable (1) or disable (0) an extension's ability to use
Continued Dialing which allows DTMF signal sending while talking on extension.
21-01-15 System Options for Outgoing Calls - Outgoing Disable on Incoming Line
Enable (1) or disable (0) the Outgoing Disable on Incoming Line feature.
21-01-16 System Options for Outgoing Calls - Supervise Dial Detection Timer
With the Outgoing Disable on Incoming Line feature, if dial tone is not detected after the
extension answers an incoming line, the system determines the call is unable to complete and
releases the DTMF receiver (0~64800 seconds).
Central Office Calls, Placing
∗
02 + group), Call Appearance (CAP) Keys (code
Document Revision 1
∗
01 +
0 8 + key # ).
,
2 - 175