NEC Electra Elite IPK II Features And Specifications Manual page 191

Electra Elite IPK II
22-02-01 Incoming Call Trunk Setup
Select the trunk type (0~7) for each trunk at each time mode (1~8): (default = Normal).
0 = Normal
1 = VRS
2 = DISA
3 = DID
Trunks: 1~200
22-03-01 Trunk Ring Tone Range
Assign Ring Tone Ranges to trunks. Trunks ring extensions according to the Ring Tone Range
selected in 22-03-01 and the settings made with either Service Code 720 or Program 15-02-02.
22-04-01 Incoming Extension Ring Group Assignment
Assign extensions to ring groups.
22-05-01 Incoming Trunk Ring Group Assignment
To have the trunks ring extensions, assign trunks to a Ring Group. The incoming ring group
assignment programmed in 41-03-01 overrides the setting in this program.
22-06-01 Normal Incoming Ring Mode
Indicate whether the trunks in the Ring Group assigned in 22-04-01 should ring (1) or not ring
(0).
22-07-01 DIL Assignment
Assign the destination extension for each DIL incoming trunk (001~200).
For this selection to work, set 22-02-01 to 4 = DIL.

22-08-01 DIL/IRG No Answer Destination
If an incoming trunk call rings longer than the DIL No Answer Time (Program 22-01-04), it routes
to the destination you specify in this option. Determine if the destination should be a Ring Group,
In-Skin/External Voice Mail, or Central Voice Mail.
Ring Groups: 1~100
102 = In-Skin/External Voice Mail
103 = Centralized Voice Mail
Central Office Calls, Answering
4 = DIL
5 = E&M Tie Line
6 = Delayed DID
7 = ANI/DNIS
Document Revision 1
2 - 169