NEC Electra Elite IPK II Features And Specifications Manual page 190

Document Revision 1
20-02-09 System Options for Multiline Telephones - Disconnect Supervision
Use this option to enable (1) or disable (0) disconnect supervision for the system trunks.
20-06-01 Class of Service for Extensions
Assign a Class of Service (1~15) to an extension.
20-10-07 Class of Service Options (Answer Service) - Automatic Answer of Universal Calls
For extension Class of Service, enable (1) or disable (0) the extension's ability to use
Auto-Answer to pick up Universal Answer calls. This allows a user to simply pick up the handset
instead of dialing a service code.
20-13-13 Class of Service Options (Supplementary Service) - Continued Dialing
For extension Class of Service, enable (1) or disable (0) an extension's ability to use Continued
Dialing, which allows DTMF signal sending while talking on extension.
20-13-23 Class of Service Options (Supplementary Service) - Display the Reason for Transfer
For extension Class of Service, enable (1) or disable (0) an extension's ability to display the
Reason for Transfer message.
21-01-15 System Options for Outgoing Calls - Outgoing Disable on Incoming Line
Enable (1) or disable (0) the Outgoing Disable on Incoming Line feature.
21-01-16 System Options for Outgoing Calls - Supervise Dial Detection Timer
With the Outgoing Disable on Incoming Line feature, if dial tone is not detected after the
extension answers an incoming line, the system determines the call is unable to complete and
releases the DTMF receiver (0~64800 seconds).
21-01-17 System Options for Outgoing Calls - Restriction Digit in Outgoing Disable on Incoming
Line
With the Outgoing Disable on Incoming Line feature, determine the number of digits (0~9) to be
dialed before the call should be disconnected.
22-01-01 System Options for Incoming Calls, Incoming Call Priority
Use this option to determine if intercom calls or trunk calls have answer priority when both are
ringing simultaneously (0 = Intercom Call Priority, 1 = Trunk Call Priority). Refer to Program
15-02-22 for lamping conditions.
22-01-02 System Options for Incoming Calls - Incoming Call Ring No Answer Alarm
Enable (1) or disable (0) the Incoming Call RNA Alarm. If enabled, the ring cadence will change
for a call that rings longer than the interval set in 22-01-03.
22-01-03 System Options for Incoming Calls - Ring No Answer Alarm Time
Set the Ring No Answer Alarm interval (0~64800 seconds). If a trunk rings a multiline terminal
longer than this interval, the system changes the ring cadence.
22-01-04 System Options for Incoming Calls - DIL No Answer Time
If an incoming trunk call rings longer than this interval, it reroutes to the Ring Group set in
Program 22-08-01 (default = 0 seconds).
2 - 168
Electra Elite IPK II
Central Office Calls, Answering