NEC Electra Elite IPK II Features And Specifications Manual page 278

Document Revision 1
11-11-27 Service Code Setup (for Setup/Entry Operation) - Destination of Automatic Transfer for
Each Department Group
Use this option to set the service code (default = 604) for setting the destination for immediate
automatic transfer for ICM and transferred calls to Department Groups.
11-11-28 Service Code Setup (for Setup/Entry Operation) - Delayed Transfer for Each Department
Group
Use this option to set the service code (default = 605) for setting the delayed transfer destination
Department Group.
11-11-29 Service Code Setup (for Setup/Entry Operation) - Delayed Transfer Cancellation for Each
Department Group
Use this option to set the service code (default = 606) for cancelling the delayed transfer
destination Department Group.
11-12-09 Service Code Setup (for Service Access) - Changed to STG All Ring
Use this option to set the service code for ringing all members of a Department Group.
11-16-10 Single Digit Service Code Setup
Assign the Single Digit (post-dialing) Service Code for All Member Ring.
15-07-01 Programming Function Keys
Assign a Department Calling key (46) so extension users can install or remove themselves from
the Department Calling Group. Additional keys can also be assigned for Department Group
features immediate calling destination (58), delayed calling destination (59) and DND
destination (60).
16-01-01 Department Group Basic Data Setup - Department Name
Assign a name to the Extension (Department) Groups.
16-01-02 Department Group Basic Data Setup - Department Calling Cycle
Set the routing cycle for calls into a department (i.e., when a user dials the department pilot
number). The system can ring the highest priority extension available (Priority Routing, 0) or
cycle in circular order to a new idle extension for each new call (Circular Routing, 1).
16-01-03 Department Group Basic Data Setup - Department Routing When Busy
Set how the system routes an Intercom call to a busy Department Group member. The caller
can hear busy tone (0) or overflow to the first available Department Group member (1). This
option is for Intercom calls to an extension, not a pilot number.
16-01-04 Department Group Basic Data Setup - Hunting Mode
Set if an unanswered call should hunt once stopping at the last member tried (0) or continually
hunt through the idle members (1).
2 - 256
Electra Elite IPK II
Department Calling