NEC Electra Elite IPK II Features And Specifications Manual page 229

Hide thumbs Also See for Electra Elite IPK II:
Table of Contents

Advertisement

Electra Elite IPK II
r
Toll Free Trunks
Certain trunks can be completely unrestricted, such as the company president's Private
Line. Users can place calls on Code Free Trunks anytime – to anywhere, without
inadvertently being Code restricted.
r
PBX Call Restriction
Code Restriction programming lets you enable/disable PBX Call Restriction and enter PBX
access codes. You only need to do this if your system is behind a PBX and you have trunks
programmed for behind PBX operation. Refer to PBX Compatibility feature for the
specifics.
r
Additional Default Entries For Common Permit Code Table
Additional entries have been added to the default Common Permit Code Table. The default
setting is as follows:
Table 1: 911
H
Table 2: 1800
H
Table 3: 1888
H
Tie Line Code Restriction Enhanced
r
In
34-01-05 : E&M Tie Line Basic Setup - System Code Restriction, if
system will follow the setting in
determine whether or not the Code restriction setting in Program 34-08 is to be followed. If
this option is set to '1', the system will follow the system Code restriction settings defined in
Program 21-05-01 through 21-05-13.
A user can temporarily override a extension's Code Restrictions.
r
r
The system will allow or deny outgoing access to trunks depending on Code Restriction.
r
If the system detects the call is answered by detecting reversal in an analog trunk this
restores both way voice paths immediately.
r
When using DISA or tie lines, additional programming is required for Code Restriction
(DISA, refer to Program 25-10; tie lines, refer to Program 34-04).
A user can temporarily block their extension's Code Restriction access, preventing
r
unwanted calls from being placed on their telephone while they are away from their desk.
Default Setting
Disabled
Code Restriction
Table 4: 1822
H
Table 5: 1833
H
Table 6: 1844
H
21-05-13 : Code Restriction Class - Restriction of Tie Line Calls
Table 7: 1855
H
Table 8: 1866
H
Table 9: 1877
H
this option is set to '0', the
Document Revision 1
to
2 - 207

Advertisement

Table of Contents
loading

Table of Contents