NEC Electra Elite IPK II Features And Specifications Manual page 811

Electra Elite IPK II
35-01-03 SMDR Options - Header Language
Specify the language in which the SMDR header should be printed.
Languages:
0 = English
1 = German
2 = French
3 = Italian
4 = Spanish
35-01-04 SMDR Options - Omit (Mask) Digits
Enter the number of digits (1~24) you want SMDR to block (i.e., "X" out). Enter 0 not to block
any digits.
35-01-05 SMDR Options - Minimum Number of SMDR Digits
Enter the minimum number of digits a user must dial (1~24) before the system includes a call on
the SMDR report. Enter 0 to include all outgoing calls, regardless of the number of digits dialed.
35-01-06 SMDR Options - Minimum Call Duration
Enter the minimum duration of a call (1~65535 seconds) that will print on the SMDR report.
Enter 0 to have calls of any duration print.
35-01-07 SMDR Options - Minimum Ringing Time
Enter how long an unanswered call must ring (1~65535 seconds) before SMDR logs it as "No
Answer). Enter 0 to allow all "No Answer" calls to print.
35-01-08 SMDR Options - SMDR Format
Do not change:
This option is added to allow an increased account code field from 8 to 16 when used in the U.K.
This allows 16 characters of the Caller ID name to be displayed. For the U.S., this option is set to
"0" and should remain at this setting as 16 characters are already provided for the account code
field.
35-02-01 SMDR Output Options - Toll Restricted Call
Enter 1 if you want the SMDR report to include calls blocked by Toll Restriction. Enter 0 to
exclude blocked calls.
35-02-02 SMDR Output Options - PBX Calls
If system is behind a PBX, enter 1 to have SMDR include all calls to the PBX. Enter 0 to have
SMDR include only calls dialed using PBX trunk access code.
35-02-03 SMDR Output Options - Display Trunk Name or Number
Select whether the system should display the trunk name (0) or the number (1) on SMDR
reports. If this option is set to "0", Program 35-02-14 must be set to "0".
Station Message Detail Recording
Document Revision 1
2 - 789