NEC Electra Elite IPK II Features And Specifications Manual page 215

Electra Elite IPK II
Table 2-8 Class of Service Options (DISA/E&M Service), Program 20-14
Item
No.
01 First Digit Absorption
For tie lines, enable or disable the ability to absorb (ignore)
the first incoming digit. Use this to make the tie trunk
compatible with 3- and 4-digit tie line service. This option
does not apply to DISA.
02 Trunk Group Routing/ARS Access
This option enables or disables a DISA or tie trunk caller's
ability to dial 9 for Trunk Group Routing or Automatic Route
Selection (ARS).
03 Trunk Group Access
This option enables or disables a DISA or tie trunk caller's
ability to access trunk groups for outside calls (Service Code
704).
04 System Speed Dialing
This option enables or disables a DISA or tie trunk caller's
ability to use the system's System Speed Dialing.
05 Operator Calling
This option enables or disables a DISA or tie trunk caller's
ability to dial 0 for the telephone system operator.
06 Internal Paging
This option enables or disables a DISA or tie trunk caller's
ability to use the telephone system's Internal Paging.
07 External Paging
This option enables or disables a DISA or tie trunk caller's
ability to use the telephone system's External Paging.
08 Direct Trunk Access
This option enables or disables a DISA or tie trunk caller's
ability to use Direct Trunk Access (Service Code 815).
09 Forced Trunk Disconnect <Not for ISDN T-point>
This option enables or disables a tie trunk caller's ability to
use Forced Trunk Disconnect (Service Code *26). This
option is not available to DISA callers.
10 Call Forward Setting by Remote Via DISA
Enable or disable a DISA callers ability to use the Call
Forward service codes (Programs 11-11-01 through
11-11-05).
Class of Service
Item
Document Revision 1
Default
Input
Data COS
01~14
0 = Off 0
1 = On
0 = Off 1
1 = On
0 = Off 1
1 = On
0 = Off 0
1 = On
0 = Off 1
1 = On
0 = Off 1
1 = On
0 = Off 1
1 = On
0 = Off 0
1 = On
0 = Off 0
1 = On
0 = Off 0
1 = On
COS 15
0
1
1
0
1
1
1
0
0
0
2 - 193